Now launching: antiques dealers are listing their first pieces · Are you an antiques dealer?

Become a dealer
EUR €
  • Dealers set their prices in euros. Amounts shown in pounds and dollars are for guidance only, based on the European Central Bank rate and updated weekly.
Anticaria Antiques dealers & exceptional pieces
EN

The Guide · Hallmarks & marks

Reading French silver hallmarks

From the Ancien Régime maker's mark to the Minerva head: how to date and verify a piece of silver.

At a glance

Since 1838, French silver has been struck with the Minerva head, accompanied by the numeral 1 (first standard, 950/1000) or 2 (second standard, 800/1000). Before it, the cockerel (1798–1819) and then the old man's head (1819–1838) denoted the first standard in Paris. The lozenge-shaped maker's mark identifies the silversmith; a square mark denotes silver plate, not solid silver.

Before the Revolution: the four marks

Under the Ancien Régime, a piece of Parisian silver was in principle struck with four marks: the maker's mark (a crowned fleur-de-lis with the silversmith's initials and device); the charge mark, struck on the unfinished piece when the duty was levied; the warden's mark or “maison commune” mark, a crowned letter changed every year that guaranteed the standard and allows the piece to be dated; and the discharge mark, applied once the duty had been paid. Paris silver was then of 958/1000 standard.

Since 1797: the state guarantee

The law of 19 Brumaire Year VI (9 November 1797) established the modern system: two legal standards for silver, 950/1000 and 800/1000, and guarantee hallmarks struck by the state. The symbols changed from period to period, which makes it possible to date pieces.

Dating table (large guarantee marks, Paris)

PeriodStandard / guarantee markKey points
before 1791Maker's, charge, warden's (date letter), dischargeDated to the year by the warden's date letter
1798 – 1819Cockerel (two successive designs)Numeral 1 or 2 depending on the standard
1819 – 1838Old man's headFirst standard, Paris
since 1838Minerva headNumeral 1 (950/1000) or 2 (800/1000)

Small items received specific hallmarks (for instance the boar's head in Paris from 1838), and provincial assay offices used their own distinguishing marks.

The maker's mark: lozenge or square?

Since 1797, the maker's mark on gold and silver has been struck within a lozenge. A square mark denotes silver plate (Christofle, Ercuis…), and such pieces never bear a Minerva head. This is the first thing to check on any piece described as “solid silver”.

The pitfalls

  • Transposed hallmarks: a mark cut from an older piece and soldered onto a later one. Look for a solder line around the mark.
  • Hallmarks worn by decades of polishing: an illegible mark proves nothing, either way.
  • Pseudo-hallmarks imitating the French system on foreign or silver-plated pieces.

Frequently asked questions

How can you tell whether a piece is solid silver?
Look for the Minerva head (used since 1838) or an earlier guarantee hallmark, together with a lozenge-shaped maker's mark. A square maker's mark without a Minerva head indicates silver plate. If in doubt, an assay office or an expert can test the standard.
What does the number on the Minerva mark mean?
The figure 1 denotes the first standard (950/1000 pure silver), the figure 2 the second standard (800/1000). The first standard is the most common for French table silver.
Can an 18th-century piece be dated precisely?
Often, yes: the letter of the jurande (guild warden's) mark changed every year, which makes it possible to date an Ancien Régime Parisian piece to the exact year, cross-referenced with the maker's mark and the guild registers.

Sources: Guillaume Janneau, Les Styles du meuble français, PUF, 'Que sais-je?' series · Musée des Arts décoratifs, Paris — permanent collections. Regulatory information is given for guidance only: please refer to the legislation currently in force.